Herunterladen Diese Seite drucken

STEINEL PROFESSIONAL HF 3360 KNX Information Seite 9

Vorschau ausblenden Andere Handbücher für HF 3360 KNX:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

10� Betriebsstörungen
Störung
Ursache
Sensor ohne Spannung
n Leitung unterbrochen
Sensor schaltet nicht ein
n Glühlampe defekt
n bei Tagesbetrieb,
Dämmerungseinstel-
lung steht auf Nacht-
betrieb
Sensor schaltet nicht aus
n dauernde Bewegung im
Erfassungsbereich
Sensor schaltet immer
n Gardine, Blume etc.
EIN/AUS
bewegt sich im Erfas-
sungsbereich des
Sensors und schaltet
durch Bewegung neu
Abhilfe
n KNX Spannungsversor-
gung überprüfen
n Glühlampe
austauschen
n neu einstellen
n Bereich kontrollieren
n Bereich kontrollieren
16
GB
1� About this document
– Please read carefully and keep in a safe place.
– Under copyright.
Reproduction either in whole or in part only with our consent.
– Subject to change in the interest of technical progress.
Symbols
!
Hazard warning!
Reference to other information in the document�
...
2� General safety precautions
!
Disconnect the power supply before attempting any work on the sensor�
• This product must only be installed by a qualified electrician in accordance with
national wiring regulations as defined in VDE 08 29 (DIN EN 5000 90).
• Installed improperly, low-voltage products can cause extremely serious personal
injury or damage to property.
• This product must never be connected to a 230 V AC power supply as it is intend-
ed for connection to an extra-low voltage power supply.
• Only use genuine replacement parts.
• Repairs may only be made by specialist workshops.
3� HF 3360 KNX
Proper use
– Sensor suitable for indoor wall and ceiling-mounting
The sensor is suitable for switching on a light automatically. The unit is not suitable
for burglar alarm systems as it is not tamperproof in the manner prescribed for such
systems.
The HF 3360 KNX is an active motion detector. It responds to the slightest movement
regardless of temperature. The integrated HF sensor emits high-frequency electro-
magnetic waves (5.8 GHz) and receives their echo. In response to the slightest move-
ment in the detection zone, the change in echo is perceived by the sensor.
17

Werbung

loading