Herunterladen Diese Seite drucken

STEINEL PROFESSIONAL HF 3360 KNX Information Seite 12

Vorschau ausblenden Andere Handbücher für HF 3360 KNX:

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

9� Technical specifications
Dimensions (H x W x D)
Surface-mounted installation, round Ø
Surface-mounted installation, square 95 × 95 × 52 mm
Concealed installation, round Ø
Concealed installation, square
Application
inside buildings
Power supply
KNX bus voltage, 21 V - 30 V
Sensor system
5.8 GHz high frequency
Mounting height
2-2.8 m
Transmitter power
approx. 1 mW
Settings
via ETS software, remote control or BUS
Angle of coverage
360° with 180° angle of aperture
Basic brightness
1-255 min
Twilight setting
2-1000 lux, teach
(only via RC6 or Smart Remote)
Twilight setting,
2-1000 lux, teach
basic brightness
(only via RC6 or Smart Remote)
Light output
Switching / dimming / basic brightness
Light 1 – Light 2
Lighting stay-ON time
1-255 min
HVAC stay-ON time
1-255 min
HVAC switch-ON delay
Room surveillance, 1-255 min
Further outputs
Sabotage protection
IP rating
Surface-mounted: IP54
Concealed: IP20
Temperature range
-20°C to +50°C
126 × 52 mm
124 × 64 mm
94 × 94 × 64 mm
(SELV)
22
10� Troubleshooting
Malfunction
Cause
No power at the sensor
n Break in wiring
Sensor will not switch ON
n Bulb faulty
n Twilight setting set
to night-time mode
during daytime
operation
Sensor will not switch OFF
n Continuous movement
in the detection zone
Sensor keeps switching
n Curtains, plant etc.
ON/OFF
moving in the sensor's
detection zone causing
the sensor to respond
Remedy
n Check KNX power
supply
n Change bulb
n Adjust setting
n Check zone
n Check zone
23

Werbung

loading