Hillrom Allen A-71100-SCH Bedienungsanleitung Seite 13

INSTRUCTIONS FOR USE
1.6 EMC considerations:
WARNING:
If the Allen Advance Table is to be used near high-frequency surgical equipment,
cardiac defibrillators, and cardiac defibrillator-monitors, refer to the product
manufacturer's instructions to make sure the equipment will operate as intended.
This device meets all requirements for electromagnetic compatibility per
IEC 60601-1-2. Other products that are used near the Allen Advance Table should
comply with this standard also. Otherwise, electromagnetic interference
between the products could cause the products to operate incorrectly. If
problems do occur, contact the product manufacturer(s).
WARNING:
The A-71100-XX/A-71101-XX should not be used adjacent to other electrical
equipment. If adjacent use is necessary, observe the A-71100-XX/A-71101-XX and
the other electrical equipment to make sure they operate as intended.
WARNING:
This device meets all requirements for electromagnetic compatibility per
IEC 60601-1-2. It is unlikely that the user will encounter problems with this device
because of inadequate electromagnetic immunity. However, electromagnetic
immunity is always relative, and standards are based on anticipated
environments of use. If the user observes unusual device behavior, particularly if
such behavior is intermittent and associated with nearby use of radio or TV
transmitters, cell phones, or electro-surgical equipment, this could be an
indication of electromagnetic interference. If such behavior occurs, the user
should try to move the interfering equipment further from this device.
Make sure the A-71100-XX/A-71101-XX operate correctly when they are used
near other electronic devices. Portable and mobile radio frequency (RF)
communications equipment can affect electrical equipment.
Medical equipment needs special precautions in regard to electromagnetic
compatibility (EMC) and needs to be installed and put into service according to
the EMC information supplied in the tables that follow.
Document Number: 80028190
Version: G
Page 13
English
Issue Date: 03 FEB 2023
Ref Blank Template: 80025117 Ver. F