Werbung
Safety and operating instructions
Data plate
A
C
B
A.
Machine type
Maximum permitted compressed air pressure
B.
Serial number
C.
D.
The warning symbol together with the book
symbol means that the user must read the
safety and operating instructions before the
machine is used for the first time.
The CE symbol means that the machine is
E.
EC-approved. See the EC declaration which
is delivered with the machine for more
information. If the CE symbol is missing, it
means that the machine is not EC-approved.
Noise level label
WA
xxx
dB
The label indicates the guaranteed noise level
corresponding to EC-directive 2000/14/EC. See
"Technical data" for accurate noise level.
Safety label
To avoid injury, before using or servicing tool, read
and understand separately provided safety
instructions.
14
Installation
Hoses and connections
D
E
A.
B.
C.
D.
♦
♦
♦
♦
Methods to prevent freezing
Ice formation in the silencer can occur when the
ambient air temperature is 0–10°C (32-50 °F) and
the relative humidity is high.
The machine is designed to avoid the formation of
ice in the silencer. Despite this, under extreme
conditions ice can form in the silencer.
Take the following actions to further counteract the
risk of ice formation:
♦
♦
© 2012 Atlas Copco Construction Tools AB | No. 9800 0653 90e | 2012-10-22
A
B
Compressed air source
Water separator (optional)
Lubricator (optional)
Max. 3 m (10 ft) compressed air hose between
the lubricator and the machine.
Check that you are using the correct
recommended operating pressure, 6 bar (e) (87
psi).
The maximum permissible air pressure, 7 bar (e)
(102 psi), must not be exceeded.
Blow any impurities out of the compressed air hose
before connecting it to the machine.
Select the correct dimension and length for the
compressed air hose. For hose lengths up to 30
m (100 ft), a hose with a minimum internal
diameter of 19 mm (3/4 in.) must be used. If the
hose length is between 30 and 100 m (100 and
330 ft), a hose with a minimum internal diameter
of 25 mm (1 in.) must be used.
Use Atlas Copco Breaker and hammer AIR-OIL
as a lubricant. Breaker and hammer AIR-OIL
counteracts freezing.
Use a water separator.
TEX 07PE
D
C
Original instructions
Werbung
