Werbung
TEX 07PE
Overview
To reduce the risk of serious injury or death to
yourself or others, read the Safety instructions
section found on the previous pages of this
manual before operating the machine.
Design and function
These instructions are valid for the TEX 07PE.
The TEX 07PE is a machine with a vibration damping
D-handle, designed for light demolition and plant
work. The machine can be used both horizontally
and vertically. No other use is permitted.
To choose the correct insertion tool, see the spare
parts list.
Choosing the correct
pneumatic hammer for a task
It is important to choose the correct size of pneumatic
hammer for the work to be performed.
A pneumatic hammer that is too small means that
the work will take longer.
A hammer that is too big means that there must be
frequent repositioning, which is unnecessarily tiring
for the operator.
A simple rule for choosing the correct size of
pneumatic hammer is that a normal sized piece of
broken material should be removed from the
workpiece within 5–10 seconds operation.
If it takes less than 5 seconds a smaller pneumatic
●
hammer should be selected.
●
If it takes more than 10 seconds a larger
pneumatic hammer should be selected.
© 2012 Atlas Copco Construction Tools AB | No. 9800 0653 90e | 2012-10-22
Original instructions
Safety and operating instructions
Main parts
A
B
E
F
C
Handle
A.
B.
Trigger
Tool retainer
C.
Air inlet
D.
E.
Silencer
Cylinder
F.
Housing
G.
H.
Front handle (optional)
Labels
The machine is fitted with labels containing important
information about personal safety and machine
maintenance. The labels must be in such condition
that they are easy to read. New labels can be ordered
from the spare parts list.
D
G
H
13
Werbung
