Extremis hopper Gebrauchsanweisung Seite 14

hopper
contents
1 x tabletop
2 x bench
24 x nut M8
24 x lock washer
4 x steel table leg with 24 carriage bolts
or
4 x powder coated aluminium table leg
optional:
4 x felt mat
1 x of 2 x backrest
2. Remove the four screws from the two
boards that prevent the table legs from
moving during transport. Fold down the
cardboard flaps to have better access to the
3. Put the lid back on the box and put the
2 boards mentioned in step 2 on top of the
lid. The box is now located centrally with
respect to the four table legs.
assembly
1. Remove the lid of the box containing the
table legs. This is the box on the wooden
pallet. To this end, just cut the pallet straps.
The packaging material must stay
intact for the rest of the assembly!
table legs. Take them out of the box and
position them as shown in the drawing.
Depending on the size of the table put
them two by two 2 m (table for 4 people),
2.6 m (table for 6 people), 3.2 m (table for
8 people), or 3.8 m (table for 10 people)
apart.
www.extremis.be