SystemAir SAVE VTR 250/B Betriebs- Und Wartungsanleitung Seite 57

GB
3. Go to Communication ⇒ HMI Address and change the address number. Repeat these steps for each connected
control panel.
Each control panel must have it's own unique address number. No control panel should have the same address value
to function properly.
12.6 Filters
The filters need to be replaced when polluted. New sets of filters, if possible, should be acquired directly from Systemair
to meet filter quality standards. If that is not possible, please contact your installer or wholesaler.
The filter type is labelled on the top of the filter
Component/product — Article number:
• BF VTR 250 M5/ePM10 50% Extract Air — 211123
• BF VTR 250 G3/Coarse 50% Extract Air — 211124
• BF VTR 250 F7/ePM1 55% Supply Air — 211125
211473 | B003
57
Accessories |