Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2.8 Shopping Function
If you need to insert a large amount of
warm food, for example after doing the
grocery shopping, we suggest to activate
the Shopping function to chill the prod-
ucts more rapidly and to avoid warming
the other food which is already in the re-
frigerator.
The Shopping function is activated by
pressing Function button (several times if
necessary) until the corresponding icon
appears
The Shopping function shuts off automati-
cally after approximately 6 hours.
During the Shopping function also the fan
inside the refrigerator compartment is au-
tomatically activated.
The fan inside the refrigerator
compartment is automatically acti-
vated also when the room tem-
perature is high (over 38°C), even
though the Shopping function is
not activated.
It is possible to deactivate the function at
any time by pressing Function button (re-
fer to "Functions Menu").
2.9 Action Freeze Function
To freeze fresh foods, you will need to ac-
tivate the Action Freeze function. Press
Function button (several times if necessa-
ry) until the corresponding icon appears.
This function stops automatically after 52
hours.
3. DAILY USE
3.1 Cleaning the interior
Before using the appliance for the first
time, wash the interior and all internal ac-
cessories with lukewarm water and some
neutral soap so as to remove the typical
.
It is possible to deactivate the function at
any time by pressing Function button (re-
fer to "Functions Menu").
2.10 Excessive temperature
alarm
An increase in the temperature in the
freezer compartment (for example due to
a power failure) is indicated by:
• flashing temperature
• freezer compartment flashing (Freezer
compartment indicator )
• red illumination of display
• sounding of buzzer
• alarm symbol.
When normal conditions are restored:
• the acoustic signal shuts off
• the temperature value continues to
flash
• the display illumination remains red.
When you press Function button / Alarm
reset switch to deactivate the alarm, the
highest temperature reached in the com-
partment appears on indicator
some seconds.
At this point the flashing stops and the
display illumination changes over from red
to white.
During the alarm phase, the buzzer can
be switched off by pressing Function but-
ton / Alarm reset switch.
The illumination of the display remains red
until normal storage conditions are re-
stored.
smell of a brand-new product, then dry
thoroughly.
Do not use detergents or abrasive
powders, as these will damage
the finish.
ENGLISH
7
for
Werbung
