Herunterladen Diese Seite drucken

SystemAir SAVE VTR 150/B L 500W Wartungsanleitung Seite 8

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

6
| Disposal and recycling
2
Disposal and recycling
This product is compliant to the WEEE directive. When disposing the unit, follow your local rules
and regulations.
This product packing materials are recyclable and can be reused. Do not dispose in household
waste.
3
Warnings
Danger
• Make sure that the mains supply to the unit is disconnected before performing any maintenance or
electrical work!
• All electrical connections and maintenance work must be carried out by an authorized installer and in
accordance with local rules and regulations.
Warning
• This product must only be operated by a person who has suitable knowledge or training within this field
or carried out with the supervision of a suitably qualified person.
• Beware of sharp edges during mounting and maintenance. Use protective gloves.
Warning
• All though the mains supply to the unit has been disconnected there is still risk for injury due to rotating
parts that have not come to a complete standstill.
Important
• The installation of the unit and complete ventilation system must be performed by an authorized installer
and in accordance with local rules and regulations.
• The system should operate continuously, and only be stopped for maintenance/service.
• Do not connect tumble dryers to the ventilation system.
• Duct connections/duct ends must be covered during storage and installation.
• Make sure that filters are mounted before starting the unit.
4
About this document
This installation manual concerns air handling unit type SAVE VTR 150/B manufactured by Systemair.
The manual consists of basic information and recommendations concerning the design, installation, start-up and opera-
tion, to ensure a proper fail-free operation of the unit.
The key to proper and safe operating of the unit is to read this manual thoroughly, use the unit according to given
guidelines and adhere to all safety requirements.
5
Product information
5.1
General
The SAVE VTR 150/B is a heat recovery ventilation unit, with a built in rotary heat exchanger. The SAVE VTR 150/B is
suitable for smaller flats or houses. It supplies filtered outdoor air to residential areas and extract air from bathroom,
kitchen and wet rooms.
There are two model options, right (R) and left (L) model (figure 1). The different models are recognized by the supply
air outlet, which is situated on left side of the unit on an (L) unit and on the right hand side on an (R) unit. Both models
come with 500 W or 1000 W installed re-heater battery.
GB
212024 | A003, rev 29

Werbung

loading

Diese Anleitung auch für:

Save vtr 150/b