Werbung
Verfügbare Sprachen
Verfügbare Sprachen
WIND PROTECTOR
(Available as standard or accessory/spare part).
This accessory allows improved helmet performance under certain conditions of use.
The Wind Protector reduces unpleasant infiltrations of air under the chin.
See Fig. 24 for assembly and disassembly.
VENTILATION SYSTEM
The ventilation system of the N40
Front Air Intake:
ing from the front air intake by directing it in the top area of the rider's head without
any dispersion. The front air intake (Fig. 25) can be completely or partially opened
depending on whether its slider is pulled completely backwards (A). To close the front
air intake, pull the above mentioned slider completely forward (B).
Chin guard air intake:
how to open and close it.
Rear Extractors:
out ensuring an optimum comfort inside the helmet. (Fig. 27).
N-COM - NOLAN COMMUNICATION SYSTEM PRE-SETTING
Your Nolan helmet is factory-preset to be equipped with the N-Com communication
system During the communication system installation (see the specific instructions
contained in the N-Com kit), it will be necessary to remove the foam material fillers
located in the polystyrene cheek pads next to the N-Com earphones seats.
WARNING
-
The above-mentioned fillers should only be removed if the helmet is used with an
N-Com compatible system installed.
5
the innovative AIRBOOSTER TECHNOLOGY channels the air com-
allows ventilation in the mouth and visor area. See Fig. 26 for
are integrated in a rear spoiler and allow warm and stale air to flow
GT helmet consists of:
24
Werbung
