HERKULES RP1200 Originalbetriebsanleitung Seite 27

• Never place tools or any other item under the plate
compactor. If the unit strikes a foreign object, stop
the engine, disconnect the spark plug, thoroughly
inspect the machine for any damage, and repair
the damage before restarting and operating the
machine.
• Do not overload the machine capacity by compact-
ing too deep in a single pass or at too fast a rate.
• Never operate the unit at high transport speeds on
hard or slippery surfaces.
• Exercise extreme caution when operating on or
crossing gravel drives, walks, or roads.
• Stay alert for hidden hazards or traffic.
• Do not carry passengers. Never leave the operat-
ing position and leave the plate compactor unat-
tended when the engine is running.
• Always stop the engine when compacting is de-
layed or when walking from one location to another.
• Stay away from the edge of ditches and avoid ac-
tions that may cause the plate compactor to topple
over. Always ascend slopes carefully, in a direct
path and in reverse to prevent the plate compactor
from toppling over onto the operator.
• Always park the unit on a firm and level surface and
shut the tool off.
• To reduce exposure to vibration, limit the hours of
operation and take periodic breaks to minimize rep-
etition and rest your hand. Reduce the speed and
force in which you do the repetitive movement.
Residual risks
The machine has been built according to the state of
the art and the recognised technical safety require-
ments. However, individual residual risks can arise
during operation.
• Furthermore, despite all precautions having been
met, some non-obvious residual risks may still re-
main.
• Residual risks can be minimised if the „safety in-
structions" and the „Proper use" are observed
along with the whole of the operating instructions.
• Avoid accidental starting of the machine.
• Use the tool that is recommended in this manual.
In doing so, your machine provides optimal perfor-
mance.
• Hands may never enter the processing zone when
the machine is in operation.
7. Technical data
Motor / Engine
Displacement
Motor power
Tank volume
Motoroil volume
Exciter oil volume
Working plate size (L x W)
Compaction pressure
Travel Speed
Vibration strokes
Compaction Depth
Max. permissible angle of
the motor
Weight
Subject to technical modifications!
Noise and vibration
m Warning: Noise can have serious effects on your
health. If the machine noise exceeds 85 dB (A),
please wear suitable hearing protection.
Noise characteristic values
Sound power level L
Sound pressure level L
Uncertainty K
Vibration characteristics
Vibration a
Note: The indicated sound levels have been deter-
mined according to a standardized testing procedure
and can be used to compare different tools with each
other. Furthermore, these values are suitable to eval-
uate the loads that sounds can cause for the user in
advance.
Attention! Depending on how you will use the tool,
the actual values may deviate from the indicated val-
ues. Take measures to protect yourself from noise
pollution. In this process it is important to take the
complete sequence of operation into account. This
also includes moments during which the power tool
operates without load and moments during which it
is turned off. Suitable measures comprise amongst
other things regular maintenance and service of the
tool and the insertion tools, regular breaks and the
appropriate planning of the sequences of operation.
www.scheppach.com
1-cylinder-4-stroke for
unleaded gasoline
ca. 450 x 350 mm
102dB(A)
WA
79,2dB(A)
pA
2,72 dB
wa/pA
30 m/s²
h
196 cm³
4,8 kW
3,5 l
max. 0,6l
0,1 l
15 kN
25 m/min
5700 vpm
25 cm
25°
aprox. 58 kg
GB | 27