Werbung
Verfügbare Sprachen
Verfügbare Sprachen
LTV39-2 R56-13
Technical data
Technical data
Noise and vibration emission
Noise (in accordance with ISO15744)
Sound pressure level
Sound power level
Uncertainty
Vibration total value, valid from 2010
(3-axes value in accordance with ISO28927-2)
Vibration value
Uncertainty
Noise and Vibration Declaration Statement
These declared values were obtained by laboratory type testing in accordance with the stated standards
and are suitable for comparison with the declared values of other tools tested in accordance with the same
standards. These declared values are not adequate for use in risk assessments and values measured in
individual work places may be higher. The actual exposure values and risk of harm experienced by an in-
dividual user are unique and depend upon the way the user works, the workpiece and the workstation de-
sign, as well upon the exposure time and the physical condition of the user.
We, Atlas Copco Industrial Technique AB, cannot be held liable for the consequences of using the de-
clared values, instead of values reflecting the actual exposure, in an individual risk assessment in a work
place situation over which we have no control.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed. An EU guide to
managing hand-arm vibration can be found by accessing
'Tools' then 'Legislation'.
We recommend a programme of health surveillance to detect early symptoms which may relate to noise
or vibration exposure, so that management procedures can be modified to help prevent future impairment.
EN
© Atlas Copco Industrial Technique AB - 9836 9450 88
dBA
81
92
3
2
m/s
<2.5
-
http://www.pneurop.eu/index.php
Technical data
and selecting
9
Werbung
