Werbung
Verfügbare Sprachen
Verfügbare Sprachen
9.5
Dairy Products Cold Storage
Area
Cold Storage Drawer
The Cold Storage Drawer can reach lower
temperatures in the cooler compartment.
Use this drawer for delicatessen products
(salami, sausage, etc.) and dairy products
that require colder storage conditions, or
for meat, chicken or fish to be consumed
quickly. It is not suitable to store fruits and
vegetables in this drawer.
9.6
Humidity Controlled Crisper
Full fresh
With the humidity controlled crisper feature,
the humidity of vegetables and fruits is
kept under control and the food is kept
fresh for a longer period of time.
We recommend that you place leafy veget-
ables such as lettuce, spinach and similar
vegetables that are sensitive to moisture
loss in the crisper, not upright on their
roots, but as horizontally as possible.
When placing the vegetables, place heavy
and hard vegetables at the bottom and light
and soft ones on the top, taking into ac-
count the specific weights of vegetables.
Never leave vegetables in plastic bags in
the crisper. Leaving them in plastic bags
causes vegetables to rot in a short time.
In situations where contact with other ve-
getables is not preferred, use packaging
materials such as paper that has a certain
level of porosity in terms of hygiene.
Do not put fruits that have a high ethylene
gas production such as pear, apricot, peach
and particularly apple in the same crisper
with other vegetables and fruits. The ethyl-
ene gas coming out of these fruits might
cause other vegetables and fruits to mature
faster and rot in a shorter period of time.
9.7
Water connection
(This feature is optional)
WARNING
The product and the water pump, if
any, must be unplugged during con-
nection.
The mains, filter and carboy connections of
your product must be made by an author-
ized service center.
Depending on the model, you can connect
your product to a carboy or directly to the
water network. To make this connection,
you must first connect the water hose to
the product.
Depending on the model of your product,
check whether the following parts are in-
cluded with the product:
1.
Union (1 piece) : Used for attaching the
water hose to the back of the product.
2.
Hose clip ( 3 pieces ) : Used for fixing
the water hose to the wall.
3.
Water hose (1 piece, 5 meters diameter
1/4 inch): Used for making water con-
nections.
4.
Faucet adapter ( 1 piece ) : Used for
cold water mains line connection with
porous filter.
5.
Water filter (1 piece *Optional): It is
used to connect the mains water to the
product. If there is a carboy connec-
tion; there is no need to use a water fil-
ter.
Connecting the water hose to the
product
Follow the instructions below to connect
the water hose to the product.
1.
Remove the fitting from the hose end
adapter attached to the back of the
product, thread the fitting onto the wa-
ter hose.
EN / 25
EN
FR
DE
Werbung
