Werbung
Verfügbare Sprachen
Verfügbare Sprachen
DISASSEMBLING
Make sure that the motor has stopped completely.
Disconnect the plug from the power outlet.
Disassemble by reversing the steps from 6-1 pictures.
If the fixing ring is not easily removed by hands, please use
tools（fig.12）.
To remove the cutting plate easily, place a screwdriver between the
cutting plate and the head as illustrated and lift it up (fig.13).
Press the unlock button before removing the head. Holding the head,
rotate it in the same direction as fig.14. Then the head can be
removed easily.
CLEANING
Remove meat, etc. Wash each part in warm soapy water.
A bleaching solution containing chlorine will discolor aluminum
surfaces.
Do not immerse the motor housing in water, but only wipe it with a
damp cloth.
Thinners and petrol will crack or change the color of the unit.
Wipe all the cutting parts by vegetable oil -wet cloth.
CLEANING AND MAINTENANCE
Werbung
