Werbung
Verfügbare Sprachen
Verfügbare Sprachen
EN
Warning:
To operate a hot plate, it must
be selected first. When you want to
use a hot plate,check the brightness
of the power indicator.After
choosing hot plate, brightness of
power indicator should increase.
Quick switch-on at maximum
power: Once you have selected the
hot plate, press the touch key
once. The hot plate will be activated at
full power.
SWITCHING OFF THE HOT PLATE
1 The hot plate must previously be
selected.
2 Using the touch key
the power level to 0.
Quick switch-off alternatives :
i) If user keep finger on the selection
sensor for 2 seconds, the related zone
will be switched off.
ii) When you press touch keys
(4/5) simultaneously, the hot plate
will switch off quickly.
RESIDUAL HEAT INDICATOR
The power indicator of the hot plate will
display an H when the glass surface
reaches a temperature that could
cause burning.
When this risk disappears,
i) the display switches off (if the device
is in stand by),
ii) or displays 0 (if the appliance is
still running).
Warning:
In a first run, H indication may
appear in a short time on the power
display. This showing is related
with setup operation and it does
not mean the cooking zone is hot.
Warning:
H indication is used for the safety
purposes in any case. Even if the
power is cut off for a long time, after
power on, H indication appears.
20
SWITCHING OFF THE DEVICE
The device can be switched off at any
time by pressing the general on/off
touch key
H will appear in the zones that are hot.
The rest of the displays will not light up.
Double and Triple Burner
Hot Plates
(4)
With double and triple burner hot
plates you can use the inside ring,
or the inside and the outside rings,
depending on the size of the pan.
C O N N E C T I N G / S W I T C H I N G
DOUBLE AND TRIPLE BURNER
(4), lower
HOT PLATES ON
1 The hot plate must be selected.
2 Select the desired power (from 1 to
9) using the touch button
(5/4).
3 Press the double or triple burner
hot plate button
and
second burner on. When the light
switches on (8), it is working.
4 In triple burner models, if once the
second burner is switched on you
want to activate the third burner,
you need to press the touch button
(6) again. The second light (8)
will then switch on.
DISCONNECTING/SWITCHING THE
DOUBLE BURNER HOT PLATE OFF
1 The hot plate that you want to
disconnect must first be selected.
2 Press the double or triple burner
hot plate button
switch off (8) and the outer ring will
be disconnected.
DISCONNECTING / SWITCHING
THE TRIPLE BURNER HOT PLATE
OFF
1 Press the touch button
first light will switch off (8) and the
third ring will be disconnected.
2 If you press the button
again, the second light will switch
off (8) and the second ring will be
disconnected. Only the first burner
(1). In standby mode an
or
(6) to switch the
(6). The light will
(6). The
(6)
will be activated.
Locking of the touch keys
of the cooking hob
To prevent undesired manipulation
you can lock the entire unit, except
for the on/off touch key, using the
locking touch key
(7). This function
is useful for child safety. When the lock
is activated, the lock indicator light (9)
comes on.
However, remember when the touch
control is on, the on/off touch key
(1)allows you to switch it off, even if
the lock is activated (the lock indicator
light (9) on).
On the other hand, if the touch control
is switched off, the locking function
does not allow the on/off touch key
(1) to be used.
To deactivate the locking function,
press the locking touch key
once again. Lock indicator (9) light off
and touch control will be ready for use.
CHILD LOCK
The child lock is different and more
complicated than key lock. User can
activate key lock via one sensor. But
child lock need a sensor sequence.
The Child Lock is being used to
prevent children from turning on
the hob.
Activating Child Lock :
1. The hob is switched on via
On/Off touch key,
2. Any zone should not be selected.
When any zone is not selected,
(5) Increase power touch key and
(4) decrease power touch key
and minus sensors is hold for 3
seconds at same time. At the end
of this period, a short buzzer sound
is heard
3. After buzzer signal , the
locking touch key is touched (there
is no need to keep press for a long
time) and a long buzzer sound is
heard and the Child Lock will be
activated and all power display
shows "L".
(7)
(1)
(7)
Werbung
