PREPARATIONS
@ Mounting ona
tripod stand, fixing unit or pan/tilt
e Mounting bracket installed on top of the camera.
unit
e As shown below, a 1/4-inch fixing hole is provided on the
bottom of the KY-F55.
e
For ceiling installations and other setups requiring top of
camera
mounting, attach the provided camera
mounting
bracket to the top of the camera using three screws.
e
If the fixing hole on the bottom of the camera cannot be
used because an optional lens such as the HZ-610MD
is
being used, attach the camera mounting bracket to the
bottom of the camera and then fix the camera to the tripod,
fixing unit, or pan/tilt unit.
(Bottom)
4-20 UNC