Maintenance and storage
Good maintenance and proper storage of your harness will extend the life of the product. The following recom-
mendations must be strictly observed:
It is forbidden to remove, add or replace any components of the harness.
The harness should be cleaned with water and a mild soap. Never use acid, solvents or any solvent based product !
Do not use a high-pressure cleaner! Do not use any abrasive aids!
Leave to dry in a well-ventilated area, away from sources of heat. Store the harness away from humidity and
ultraviolet light.
Avoid any atmosphere that is corrosive or excessively hot or refrigerated.
Transport
Make sure your harness is protected from heat, moisture, corrosive environments, ultraviolet rays, etc. during a
transport.
EN
Page
39 from 39