Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Notes on application
It is essential that the lanyard is attached to the harness only at the designated back attachment point ("D" ring) or
at the sternal attachment points (fall arrest loops). The sternal attachment points must always be used simultane-
k
l
ously.
If you attach a lanyard with energy absorber to an extension of the anchor point on the back of the harness, you must
ensure that the total length of lanyard + extension + connector is 2 m or less.
Attach temporarily unused carabiners these trian-
gles when they are not in use.
CAUTION: do not use for fall arrest anchorage or
evacuation!
The front attachment point consists of two
webbing loops (each marked with « A/2 ») and both
must be attached together with the attachment
device connector should they be used.
EN
Page
35 from 39
Werbung
Inhaltsverzeichnis
