Kesser KHZ-IRSH-MF Bedienungsanleitung Seite 18

Setting the thermostat
The thermostat regulates the temperature from 40 °C to 180 °C.
To find the ideal thermostat setting, please proceed as follows:
• Set the thermostat's infinitely variable rotary switch (1) to the highest level.
• Once the desired temperature is reached, slowly turn the rotary switch (1) back until
the device turns off.
• The device now automatically maintains the desired temperature level.
The thermostat automatically regulates the room temperature:
• When the set value is exceeded, the heater switches off.
• When the set value is lower, the heater automatically switches on again.
At the highest level of the thermostat, the heater runs permanently.
Technical Data
Model: KHZ-IRSH-MF (with remote control)/ KHZ-IRSH-BMF ( withremote control)
Power: 850/1650/2500 W
Voltage: 230 V
Size: ca. 840 x 180 x 85 mm (BxHxT)
cable length: ca. 180cm
Tripod height: 110-175 cm>
Cleaning and Maintenance Instructions
Maintenance
Attention! Careful and regular maintenance of Infrared Heater considering our instructions
assume great importance so as to attain a long and efficient operation of your appliance.
6- Check the filthiness of the Reflector and IR-Filament at least once a month. If necessary,
apply cleaning and maintenance instructions.
7- The number of checks may be increased considering the amount of the dust in the
environment.
8- Check the deformation of the Reflector, Wire and Frame visually while cleaning the
appliance. In case of any deformation, consult to your technical service.
9- Check the power cord and plug visually while cleaning the appliance. In case of any
deformation, consult to your technical services.
Hergestellt für Dilaw Warehouse GmbH // Fuggerstraße 15a // 48165 Münster // Germany
18
www.eshopping.de