Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Service
Model KHZ-IRSH-MF ( with remote control)/ KHZ-IRSH-BMF (with remote control)
The functions of the heater may be controlled via the buttons on your remote control and
LED screen. You may also control some of the functions of your heater through the buttons on
the front side of the heater.
Remote Control
10
On/Off button
11
Taste 1650W
12
Timer button
13
Taste 2500W
14
Taste 850W
1. Turn on the power, the buzzer on the products will beep once, the digital screen and the
indicator is no show. At this time, press On / Off button to make it in stand by mode.
2. Press the function button to choose the power level. P0 indicator appears on the screen,
and the indicator flashes three times, indicating that the appliance is in stand by mode. P1
indicator appears on the screen, and the indicator flashes three times, indicating that the
appliance is in low-grade mode. Press the function button again to mid-grade, the buzzer will
beep once, P2 indicator appears on the screen, and the indicator flashes three times,
indicating that the appliance is in mid-grade mode. Press the function button again to high-
grade, the beeper will beep once, P3 indicator appears on the screen, and the indicator
flashes three times, indicating that the appliance is in high-grade mode. Press the function
button again, you can choose low, medium and high gear, P0 indicator appears on the
screen, and the indicator flashes three times, indicating that the appliance is in stand by
mode. Continuously press the function button, "P0 - P1 - P2 - P3 - P0" appears on the digital
tube as a circulation, corresponding to the appliance mode is "Stand-by ---Low-grade---Mid-
grade---High-grade---Stand-by".
3. In stand by mode, press the timer button, the appliance can set time from 1 to 24 hours.
After set the time, the indicator next to the digital tube will light up, it means that the
appliance has been selected timer function. "0" indicates time not set.
4. When the appliance is on working, the digital screen always shows the power state (P1-P2-
P3). The timer setting, when the indicator lights up, it means that the machine has been set a
timer function from 1 to 24 hours. To view the regular time, press the timer button, the
appearing time is the present setting time, at this time the indicator also flashes three times
continuously, indicating that the appliance enters into the timer setting state.
Control through the main module on the heater:
Hergestellt für Dilaw Warehouse GmbH // Fuggerstraße 15a // 48165 Münster // Germany
16
www.eshopping.de
Werbung
