Kesser KHZ-IRSH-MF Bedienungsanleitung Seite 17

17
P0 indicator appears on the screen when the heater is switched on and it is in stand by
mode.
The 1st digit on the screen illustrates P symbol while 2nd digit illustrates power level mode from
1 to 3.
The button number 1 on the heater functions as ON / OFF. The heater starts operating at the
power level mode at which it has been switched off.
Press the button number Temi on the heater to adjust power mode.
P0 appears on the screen when pressed ON / OFF button and the power level mode (P1，P2
，P3) can be adjusted through the buttons on the remote control.
Press ON / OFF button on the remote control or the heater itself to switch off the heater.
The heater starts functioning in stand by mode after electricity cut.
LED keeps flashing in case of a program set by remote control.
Buzzer signal is given following each command.
LED
Power Level Indicator
ON/OFF/Power mode button Timer Button
Model KHZ-IRSH-OF (without remote control)
1.Turn the on/off rotary switch (1) clockwise to turn on the device and set the desired room
temperature.
www.eshopping.de
Hergestellt für Dilaw Warehouse GmbH // Fuggerstraße 15a // 48165 Münster // Germany