cecotec CONGA 2490 Bedienungsanleitung Seite 49

2. Back-home mode
This mode can be selected at any point of any cleaning cycle. Once it is activated, the robot
will automatically return to the charging base.
Warning: Make sure not to charge the robot with the Wet & dry tank installed when it
contains water.
Remote control
SCHEDULING
Warning: The robot cannot be scheduled from more than one device at a time. Make sure to
schedule it either from the mobile phone App or from the remote control.
The first time the robot is operated, it will map the whole house. The map will be saved to
the robot's memory once it has finished cleaning.
Note: Make sure the light indicator is lit up in blue before starting cleaning, indicating it is
activated. If not, press any button on the remote control to wake it up.
REMOTE CONTROL BINDING
If the robot does not respond to the remote control, follow the below steps:
1. Press the edge mode button on the remote control for 5 seconds for the remote control
to enter pairing mode. The screen will display 8888.
2. The remote receiver will be activated in 5 seconds and will enter pairing mode. The
remote control's signal is received and the remote control returns to normal status.
1. Schedule
2. Power levels (Turbo/Normal/Eco)
3. Back home
4. Time
5. Manual control
6. On/Pause
7. Edge mode
ENGLISH
49