Herunterladen Diese Seite drucken

KKT KOLBE KKTHVB10.24 Benutzerhandbuch Seite 92

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Connecting the Device
Battery communication connection
• Connect the end of the battery communication cable
marked with the sticker "PCS" to the communication port
of the inverter (RS485 interface; marked "BMS" on the inverter
model HKW10-1P3).
• Connect the end of the communication cable marked with the sticker
"BMS" to the RS485 port of the battery storage.
Connection sketch
 Note:
It is recommended to integrate a circuit breaker in the power
connection between the device and the inverter (2).
1
2
42
Inverter
Inverter
Circuit breaker
Simple
Connection
Recommended
Connection

Werbung

loading