Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Mounting the battery storage
• Drill the marked spots each with a Ø10mm drill
approx. 60mm deep
and blow or suck out the drill holes.
• Insert the heavy-duty anchors into the drilled holes,
unscrew the nuts, remove the washer and spring
washer and put the wall bracket on.
• Attach the wall bracket to the wall by screwing
the nuts with the spring washers and washers back on
and tightening them so that the heavy-duty anchors
spread and anchor themselves in the wall.
Make sure that the fastening is sufficiently solid!
• Lift the battery storage unit with at least 2 people
and fix it to the wall bracket or hang it on the wall
bracket by placing the rear holding rail centrally
on the wall bracket and sliding it onto its hook
elements from above.
Mounting the System
39
Werbung
