Sunny Health & Fitness SF-E3889 SMART Bedienungsanleitung Seite 27

3. Press the ENTER button to save the values and move to the next parameter to be adjusted.
NOTE: If you set up the target time to work out, then the next parameter of DIST
(DISTANCE) cannot be adjusted.
4. Continue through all desired parameters.
5. After finishing the setup of the desired parameters, level 1 will flash. Use the UP or DOWN
button to adjust, then press the ENTER button until finished. (There are 10 times total). Press
the START/STOP button to begin the workout.
NOTE: Once the workout parameter counts down to zero, it will beep and stop the
workout automatically. Press the START/STOP button to continue the workout to reach
the unfinished workout parameter.
APP CONNECTION:
1. Scan the QR code below to download the SunnyFit app onto your mobile device.
2. If this is your first time using the SunnyFit app, follow the in-app instructions to register for your
free SunnyFit account and log in.
3. Ensure that the Bluetooth
4. To connect the equipment to the SunnyFit app:
a. From the "Workout" tab, press on the "Search" button to search for your equipment.
b. Once your equipment appears on the list, tap the "Select" button to confirm.
c. NOTE: If your equipment does not appear on the "Searching for Equipment" list, check the
EXERCISE METER on your equipment to ensure that it is not in sleep mode and your
phone's Bluetooth function is on, then tap "Retry" to search again.
d. Once your equipment shows up on the "Workout" tab as "Currently Selected", your
equipment is now ready to display, track, and record your equipment's workout stats on the
app!
5. If you are unable to replicate these steps, or have any other issues with the SunnyFit app,
please contact SunnyFit support at
to request support ("Me" tab -> "Contact Us").
function is turned on from your mobile device.
support@sunnyfit.com
26
, or use the in-app "Contact Us" form