Sunny Health & Fitness SF-E3889 SMART Bedienungsanleitung Seite 17

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com or 1-877-90SUNNY (877-
907-8669).
STEP 4:
Attach the 2 Pedal Arms (No. 9L/R) to 2
Roller Arms (No. 7) with 2 Pedal Hinge
Bolts (No. 21), then put on 2 Flat
Washers (No. 34) and 2 Nylon Nuts
(No. 22) to the end of 2 Pedal Hinge
Bolts (No. 21) by Allen Wrench (No.
119) and Spanner (No. 115).
NOTE: Do not tighten the Pedal Hinge
Bolts (No. 21) during this step.
Attach 2 Pedal Arms (No. 9L/R) to 2
Swing Bars (No. 5L/R) respectively with
2 Allen Bolts (No. 13) and 2 Flat
Washers (No. 30), then put on 2 Flat
Washers (No. 30) and 2 Nylon Nuts
(No. 24) by Allen Wrench (No. 117)
and Spanner (No. 118).
NOTE: Do not tighten the Allen Bolts
(No. 13) during this step.
Attach 2 Pedals (No. 54L/R) to the
Pedal Arms (No. 9L/R) using 8 Phillips
Screws (No. 18) by Spanner (No. 116).
NOTE: Both Pedals (No. 54L/R) are
labeled: L for LEFT and R for RIGHT.
Now you can tighten Hex Bolts (No. 17)
from STEP 3 by Spanner (No. 116) and
Spanner (No. 118).
Cover with the 2 Nut Caps (No. 55).
And then tighten and secured 2 Pedal
Hinge Bolts (No. 21) and 2 Nylon Nuts
(No. 22) by Allen Wrench (No. 119)
and Spanner (No. 115).
NOTE: Ensure that all bolts and
washers are in place and now you can
tighten Allen Bolts (No. 13) by Allen
Wrench (No. 117) and Spanner (No.
118).
16