Swiss Pro+ SP-AF24L.D Bedienungsanleitung Seite 5

USING YOUR AIR FRYER OVEN
Product Features
1.The adjusting knob can be rotated clockwise or anticlockwise to quickly switch
modes and adjust time and temperature.
2. Highlight LED display, clear operation, real-time display of temperature and
remaining time.
3. Fan Speed Button
The oven has two speed fan working: low or high. One fan speed light is on when fan
works at low speed, while two fan speed lights on under high fan speed works.
4. Power ON/OFF Button
Use to start or stop the oven after set well.
5. Light Button
Press the light button throughout the cooking process to observe cooking if desired.
Press the light button again to turn it off. The light will turn off after one minute.
Operating Instructions
1. Power on (power on initialization), standby mode The control panel is plugged into
the standby mode: the buzzer will give a beep. The Temperature LED Display shows
"OFF".
2. Power on
Short press the POWER button to start the machine, and the LED screen will light up.
The default mode is bread mode. It is shown as follows:
The bread symbol flashes, all other symbols are on, and the duration, temperature and
fan speed (Low speed shows small blade symbol and High speed shows strong wind
blade symbol) are shown in the table below. The above process is defined as the boot
screen. When the adjusting knob is turned clockwise, the flashing icon will move to
the left, and when the adjusting knob is turned clockwise, the flashing icon will move
to the right. Press start when mode is selected, and press again to enter the pause
process.
During Mode Operation：
1. Temperature display set temperature, time display minutes countdown. Return to
the boot screen when returning to zero.
2. Press the fan speed button to switch the wind speed. The pre-set program of
High wind is not allowed to adjust to Low wind speed.
3. Press the light button to turn the halogen lamp on or off. After forgetting to turn
OFF the halogen lamp for 60s, it will automatically turn OFF.
4. Press the time button to adjust the duration in the pre-set program, clockwise
rotation +5min, the maximum 60min, counter clockwise rotation -5min, the minimum
0min. Every time you adjust the buzzer drop short tone.
5. After pressing the temperature button , the temperature control temperature in
the pre-set program can be adjusted by clockwise rotation of +5 ℃, the maximum is
230℃, counter clockwise rotation of -5℃, the minimum is 60℃. Each adjustment of
4