Herunterladen Diese Seite drucken

SIP OPTICUT DISC 260 F Betriebsanleitung Seite 102

Werbung

Schutztuch
gerademachen, um Úberlappung
zweier weiteren Schutztuchen zu
versichern.
2.2.1 Längseinstellung der
Anhängevorrichtung und
Einstellung der
Grasschnitthöhe
Die
Anhängevorrichtung
Fahrtrichtung immer um 2º nach vorne geneigt
sein.
Bild - Figure 8
2
Überprüfen ob die Anhängevorrichtung um
2º nach vorne geneigt ist. Dabei kann der
Blick auf das Tuch (1) helfen: Sein
Seitenunterrand
Boden entfernt sein.
Oberlenker (2) dementsprechend einstellen.
Die empfohlene Neigung ermöglicht
eine Schnitthöhe von 40-70 mm.
Das Mähwerk wurde so gefertigt, dass
es
bereits
Neigungswinkel von 2º hat.
Der
maximale
Anhängevorrichtung in Fahrtrichtung
darf 7º (3) nicht überschreiten.
91
auf
Verbindungen
muss
in
Traktor-
1
soll
gleichmäßig
vom
einen
vorgefertigten
Neigungswinkel
der
Settle the protective curtain on
joints to secure the covering of
the nex two protective curtains.
2.2.1 Longitudinal adjustment of the
hitch and grass cutting height
In the direction of movement of the tractor, the
hitch must always be inclined at an angle of 2º.
Bild - Figure 9
Check if the hitch is leaned forward for 2º. A
look at the curtain (1) may help: its lower
side edge should be equally distant from the
floor.
Adjust the upper bar (2) suitably.
The recommended inclination allows
mowing at a height of 40-70mm.
The mower is designed with a forward
tilt angle of 2º prior to the connection.
The tilt angle of the hitch in the
direction of travel must not
7º (3).
3
exceed

Werbung

loading