STIEBEL ELTRON DHM 3 Bedienung Und Installation Seite 37

INSTALLATIoN
Installation

f Use the appliance back panel as a drilling template.
f Secure the appliance back panel to the wall with suitable
rawl plugs and screws.


f Route the power cable through the cable entry in the back
panel.
www.stiebel-eltron.com


f Hook in the appliance cover with the heater at the bottom.
f Click the heater into place using the snap fastener.
f Secure the appliance cover with the cover fixing screws.
10.2.2 Tap installation
Material losses
!
f When making the connections, counter the torque
on the appliance using a size 14 spanner.
Pressurised connection
f Fit the 3/8 connection hose provided and the 3/8 tee.
f Install the tap. For this, also observe the tap operating and
installation instructions.
Non-pressurised connection
f Install the tap. For this, also observe the tap operating and
installation instructions.
DHM | 37