STIEBEL ELTRON DHM 3 Bedienung Und Installation Seite 34

INSTALLATIoN
Appliance description
8. Appliance description
8.1 Standard delivery
The following are delivered with the appliance:
- Sieve inside the cold water inlet
- Special aerator
- Connection hose 3/8, 500 mm long, with gaskets*
- Tee 3/8*
*for the connection as pressure-tested appliance
8.2 Accessories
Special aerator
- for DHM 3 and DHM 4
- for DHM 6 and DHM 7
Note
Fitting the special aerator supplied provides an optimum
water jet.
34 | DHM
Pressure-tested tap
- WSH 10 | WSH 20 - Sensor tap for washbasins
Non-pressurised taps
- WSN 10 | WSN 20 - Sensor tap for washbasins
- MAZ - Twin lever basin tap
- MAE-W - Mono lever basin tap
9. Preparations
f Flush the water line thoroughly.
Water installation
A safety valve is not required.
Taps
f Use suitable taps (see chapter "Appliance description /
Accessories").
www.stiebel-eltron.com