DeLonghi AQVA Bedienungsanleitung Seite 24

The temperature displayed is always the "Comfort" tempera-
ture, regardless of the currently selected "Pilot Wire" mode.
If the Pilot Wire programmer is not connected, "Comfort" op-
erating mode is selected automatically.
GB
4.4.2 COMFORT
The "Comfort" temperature set point is the temperature
desired by the user.
Press the "Mode" selection key until the icon
^
appears on the LCD.
On the appliance the upper LED turns blue.
Select the desired temperature set point by
using the "+" and "-" keys.
The temperature can be choosen in the
interval between 7 °C and 32 °C.
4.4.3 NIGHT/ECO
higher than "Comfort" temperature set point. If the "Com-
the latter will be automatically adjusted accordingly.
Press the "Mode" selection key until the icon
{
appears on the LCD.
On the appliance the upper LED turns yellow.
Select the desired temperature set point by
using the "+" and "-" keys.
The use of this operating mode is recommended in night-
time hours and in case no people is in the room for more
than 2 hours.
4.4.4 ANTI-FREEZE
7 °C. The appliance starts heating when room temperature
goes under 7 °C and with low energy consumption it pre-
vents the room temperature to reach the freezing point.
Press the "Mode" selection key until the icon
}
appears on the LCD.
On the appliance the upper LED turns green
This operating mode is recommended when no people is in
the room for more than 1 day.
4.4.5 CHRONO
In "Chrono" mode, you can select one of the two preset chro-
no-thermostat programs (P1 and P2) or the custom program
(P3). The latter lets you set various temperatures ("Comfort"
week.
CHOICE OF PROGRAM
Press the "Mode" key until the icon
played. The upper LED on the appliance be-
comes white. Then press the "Mode" and "-"
buttons together and hold them both down
for at least 3 seconds.
Press the "+" and "-" buttons to set the pro-
¶
Press the key to activate the function or the "-" key to de-
activate it.
PROGRAM P1
FROM MONDAY TO FRIDAY
SATURDAY AND SUNDAY
PROGRAM P2
FROM MONDAY TO SUNDAY
PROGRAM P3 - CUSTOM
With the "P3" program, you can set different temperatures
day of the week.
22
±
is dis-
HOURS MODE
0 - 6
6 - 9 Comfort
9 - 16
16 - 23 Comfort
23 - 0
0 - 7
7 - 23 Comfort
23 - 0
HOURS MODE
0 - 7
7 - 23 Comfort
23 - 0