Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Starting the programme
Selecting programmes
See chapter «Selecting programmes»
Selecting additional functions
See chapter «Additional functions»
Changing a programme before the start
X Press the desired programme button again.
All control lights for the available additional functions
flash again and all settings are deleted.
X Select any additional functions.
Adding laundry
Only dry fabrics which have been washed with water in
the dryer.
X Place the laundry loosely in the drum, mixing large
and small items
Start programme
X Press the start button.
The control light is illuminated and the programme
starts automatically.
If the child lock is activated:
X Hold the start button down.
X Simultaneously tip the fast forward button.
Programme progress / Programme status
X With the moisture controlled programmes the damp-
ness of the laundry is continually monitored by an elec-
tronic sampling system.
The programme time remaining is displayed.
This remaining time is recalculated several times during
drying, so the effective programme end will therefore
vary by a few minutes.
X For time programmes, the time remaining to the end
of the programme is displayed.
55
Adding more laundry
This is possible at any time.
X Press the «Open door» button.
Wait for the drum to stop.
X Add your laundry.
X Close the door again.
X Press the start button.
If the child lock is activated:
X Hold the start button down.
X Simultaneously tip the fast forward button.
The drying process is continued.
Interrupting the programme
X Interrupt the programme by pressing the fast forward
button repeatedly, until «Programme end» appears on
the display.
If the child lock is activated:
X Hold the start button down.
X Simultaneously tip the fast forward button.
Programme end
The programme end is indicated by the display value
«00:00h», the display of «Programme end» as well as a
flashing control light.
An audible signal (only if summer function is switched
on).
The drum continues to rotate periodically after the
programme has ended to prevent the laundry from
creasing (only if crease protection has been switched on,
for 30 or 60 minutes).
The washing should be taken out now at the latest.
Remove the laundry
X Press the «Open door» button.
The drum light comes on.
X Remove the laundry.
X Clean the filters.
Cleaning the filters
When fabrics are used, the fibres are rubbed (laundry
fluff), which are released when the fabrics are dried, col-
lecting in the filter in the door opening.
The inner, fine filter (A) must therefore be cleaned after
each drying process.
Werbung
