Proper Use; Technical Data - EINHELL 20.483.00 Originalbetriebsanleitung

Anleitung_BT_HS_12_SPK1:_

4. Proper use

The hammer screwdriver is a handy d.c. tool
designed to be connected to a motor vehicle's 12 V
power supply for use in the automotive field. It is
suitable for fastening and releasing threaded
connections on motor vehicles (fitting tyres, etc.).
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

5. Technical data

Max. loosening torque
Operating voltage
Power Input
Working range (max. thread size)
Square drive mount
Weight
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L sound pressure level
pA
K uncertainty
pA
L sound power level
WA
K uncertainty
WA
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions)
determined in accordance with EN 60745.
Vibration emission value a =3,7 m/s
h
K uncertainty = 1,5 m/s 2
11.08.2010 14:09 Uhr Seite 9
Additional information for electric power tools
Warning!
The specified vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equipment
is used and may exceed the specified value in
exceptional circumstances.
The specified vibration value can be used to compare
the equipment with other electric power tools.
The specified vibration value can be used for initial
assessment of a harmful effect.
Keep the noise emissions and vibrations to a
minimum.
Only use appliances which are in perfect working
order.
Service and clean the appliance regularly.
Adapt your working style to suit the appliance.
Do not overload the appliance.
Have the appliance serviced whenever
necessary.
260 Nm
Switch the appliance off when it is not in use.
Wear protective gloves.
12 V / d.c.
80 W
Residual risks
M14
Even if you use this electric power tool in
accordance with instructions, certain residual
12.7 mm (1/2")
risks cannot be rules out. The following hazards
1,7 kg
may arise in connection with the equipment's
construction and layout:
1. Lung damage if no suitable protective dust mask
is used.
2. Damage to hearing if no suitable ear protection is
used.
3. Health damage caused by hand-arm vibrations if
the equipment is used over a prolonged period or
83 dB(A)
is not properly guided and maintained.
3 dB
94 dB(A)
3 dB
2
GB
9