Items Supplied; Proper Use; Technical Data; Putting Into Operation - EINHELL KSS12/2 Bedienungs- Und Wartungsanleitung

Anleitung KSS 12-2_SPK1
GB
Dear Customer,
Before operating the hammer-action screwdriver for
the first time, please read these instructions and
observe the information provided with regard to its
operation and maintenance.
Please keep these instructions near the tool at all
times.

1. Items supplied

1 screwdriver with hammer action, 12 V/DC
1 plastic carrying case
Set of drive bits size 17, 19, 21 and 23 mm
(one of each)
1 adapter cable

2. Technical data

Max. loosening torque
Operating voltage
Current rating
Working range (max. thread size)
Sound power level L
WA
Vibration
Square drive mount
Weight
Please note:
Wear proper protective clothing whenever you
work with the hammer-action screwdriver.
Please observe the safety instructions.
3. Features
4
10.11.2005 17:10 Uhr Seite 4
Item Description
1 ON/OFF switch
2 Reversing switch
3 operating LED
4 Square drive mount (mounting shaft)
5 12V connecting plug with internal fuse
6 adapter cable

4. Proper use

The hammer screwdriver is a handy d.c. tool
designed to be connected to a motor vehicle's 12 V
power supply for use in the automotive field. It is
suitable for fastening and releasing threaded
connections on motor vehicles (fitting tyres, etc.).
Repairs and servicing of the tool should only be
carried out by authorized professional workshops.
260 Nm
5. Safety instructions
12 V / DC
5,5 A
Practise these safety precautions to protect yourself
M14
and your surroundings from accident hazards.
94 dB(A)
2 Use the hammer-action screwdriver only as it is
4,4 m/s
intended.
1/2"
Keep tools out of the reach of children.
1,7 kg
Only begin work if you are well-rested and not
distracted.
Disconnect the tool from the power supply before
beginning any trouble-shooting or maintenance
work.
Use only original spare parts.
Never run the tool at full idling speed with no load
for an extended time.
Wear protective clothing whenever you work with
the screwdriver.
Wear ear protection and gloves!
The corresponding safety information can be
found also in the enclosed booklet.

6. Putting into operation

Join the 12 V connector (Fig. 1 Item 5) to the
vehicle's cigarette lighter socket. If there is no
cigarette lighter socket, insert the 12 V connector
(Fig.1 Item 5) in the 12 V socket of the adapter cable
(Fig.1 Item 6). Then connect the pole clamps (+/-) to
the corresponding poles of the vehicle's battery.