Herunterladen Inhalt Inhalt Diese Seite drucken

Abus Terxon MX Installationsanleitung Seite 133

Vorschau ausblenden Andere Handbücher für Terxon MX:
Inhaltsverzeichnis

Werbung

If you use a loudspeaker with the system, you can test it in
the programming menu under item 094.
You have now made all settings in the programming
menu. Exit the programming menu by entering 099 and
confirming with
. You are now in the user menu.
We now add two users to the system. The first user
(BERND) is to activate and deactivate the system by
entering a code, the second (ANNA) using a chip key.
In the user menu, enter the administrator code 1234.
Now enter 4 on the keypad. The control unit shows:
Enter the user number of User 2. This is: X002. Press
. The display shows:
Now change the name on the keypad – in this case,
BERND.
Press the Enter key
.
You are now asked to enter a new code in the system.
Enter 1111 (for example) and confirm with
is for activating and deactivating the alarm system.
In the next step, we add User Anna, who is to activate and
deactivate the alarm system using a chip key. In the user
menu, enter the administrator code (1234) followed by 4.
You see the following:
Enter the user number of User 3. This is: X003. Press
. The display shows:
Now change the name to ANNA and press the Enter key
. The display shows:
After you press the Enter key, the display shows:
Hold the chip key in front of the control unit. You hear a
double tone. The chip key has been successfully
programmed. If required, you can also define a PIN for the
user. In this case, the user can choose between code and
chip key to activate/deactivate the alarm system.
To activate the Terxon MX, enter the code or hold the chip
key in front of the system. You see the following display:
By pressing "A" or
complete system. By pressing B, C or D, you can select
individual sub-areas. In this specimen installation, you
could for example activate sub-area B to arm the door
contact and thus monitor the exit doors.
The system is now fully installed and configured.
If you use SG1710 or SG1900 instead of SG1650, see the
following connection diagrams.
. This code
29
, you can now activate the
UK

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis