cecotec READYWARM 2000 MAX CERAMIC ROTATE SMART Bedienungsanleitung Seite 36

ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. Control panel
2. Air outlet
3. Base
4. Power switch
Fig. 2
1. On/Off
2. Heating mode selection
3. ECO mode activation
4. Temperature setting
5. Oscillation mode activation
6. Timer selection
Fig. 3
On/Off
1.
Timer selection
2.
Temperature increase
3.
Heating mode selection
4.
Oscillation mode activation
5.
Temperature decrease
6.
NOTE:
the graphics in this manual are schematic representations and may not exactly match the
device.
2. BEFORE USE
This appliance is packaged in a way as to protect it during transport. Take the device out
-
of its box and remove all packaging materials. You can keep the original box and other
packaging elements in a safe place. This will help you prevent damage to the device when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
Make sure all parts and components are included and in good conditions. If there is any
-
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
36
READYWARM 2000 MAX CERAMIC ROTATE SMART