Herunterladen Diese Seite drucken

LD Seating tango Bedienungsanleitung Seite 6

Werbung

CZ/
Nastavení multifunkčních
područek
Upozornění:
před vlastním nastavení se ujistěte jakým
typem područek je židle vybavena. dle
typu područek, kterými je židle vybavena,
je možné provést nastavení:
tango
Výšky područek:
1. stiskněte tlačítko na boční straně
područky
2. Nastavte vhodnou výšku područky
3. uvolněte tlačítko, područka je
automaticky zajištěna
Šířky područek:
1. povolte fixační šrouby na spodu
područek
2. Nastavte vhodnou šířku područek
3. Fixační šrouby dotáhněte
Hloubky loketníků:
1. Mírným tlakem posuňte loketník
do požadované polohy
Natočení loketníků:
1. Mírným tlakem natočte loketník
do požadované polohy
(max. rozsah +/- 30°)
gb/
Adjustable
Arm pad rotation adjustment:
armrests setting
1. turn the arm pad (elbow support)
Notice:
Found out model of armrests the chair is
de/
equipped before its setting. according
used armrests model, there can be adjusted:
Armrest height adjustment:
Hinweise
1. push the button on side of the armrest
klären sie vorerst ab, um welches armleh-
2. set the armrest in desired height
nenmodell auf ihrem stuhl montiert ist. Je
3. release the button, the armrest will be
nach ausführung können die armlehnen
locked automatically
folgende einstellmöglichkeiten besitzen:
Armrest width adjustment:
Höheneinstellung:
1. release fixing screws at bottom of the
1. drücken sie auf den knopf seitlich
armrests
2. set the desired width
2. Bringen sie die armlehnen in
3. tighten the fixing screws
Arm pad depth adjustment:
3. Lassen sie den knopf wieder los.
1. Move the arm pad (elbow
die armlehne rastet ein.
support) forward or backwards in
desired position by pushing softly
Breiteneinstellung:
1. Lösen sie die Handschrauben
an der unterseite der armlehnen.
2. stellen sie die gewünschte Breite
softly in the desired position
der armlehnen ein.
(max. range +/- 30°)
3. Ziehen sie die Handschrauben
wieder an.
Einstellung
der Armlehnen
Tiefenseinstellung:
1. Bewegen sie hierzu die armauflage
nach vorne und hinten, um die
gewünschte position einzustellen.
Einstellung des Winkels der
Armauflage:
1. Bringen sie die ellenbogenauflage
durch sanftes schwenken in die
gewünschte position
an der armlehne.
(max. +/-30°)
die gewünschte position.

Werbung

loading