Ip Settings; The Website Of The Power Source; Opening And Logging Into The Smartmanager For The Power Source - Fronius Ri Fb Inside/I Bedienungsanleitung

IP Settings

Node address 0 is set via the DIP switch on delivery. This corresponds to the fol-
lowing IP settings:
-
-
-
In the case of ProfiNet, the assignment of the IP address, the subnet mask, and
the default gateway is carried out by the master. A device name is also assigned
to the interface by the master.
The Website of The power source has its own website, the SmartManager.
the Power
As soon as the power source has been integrated into a network, the SmartMana-
Source ger can be opened via the IP address of the power source.
Depending on the system configuration and software upgrades, the SmartMana-
ger may contain the following entries:
-
-
-
-
-
-
-
-
Opening and
Logging into the
SmartManager
for the Power
Source
1
2
3
4
The SmartManager of the power source is displayed.
34
IP address: 0.0.0.0
Subnet mask: 0.0.0.0
Default gateway: 0.0.0.0
Overview
Update
Screenshot
Save and restore
Function packages
Job data
Overview of characteristics
RI FB INSIDE/i
3
1
Presettings/System/Information ==> note down IP address of power source
Enter the IP address into the search field of the browser
Enter username and password
Factory setting:
Username = admin
Password = admin
Confirm displayed message
2
1.9.0-16501.9508
xx.x.xxx.x
4