Safety Notes - CCV Pad Next Erste Schritte

Safety notes

Power
• Before you connect the terminal power pack to an
electrical outlet, check that the on/off power switch
on the terminal is off. If the terminal does not
have an on/off switch, check that the power cable
connector is removed from the terminals´s power
port. Or, when connecting the terminal to a power
pack, always connect the plug of the power pack
to an electrical wall outlet first. Then connect the
power cable to the terminals´s power port. The
power pack is rated as follows: Input Voltage
100 - 240 VAC 50/ 60 Hz and output voltage 5V DC, 1A.
• Do not use the adapter in a high moisture
enviroment. Never touch the adapter when your
hands or feet are wet.
Disconnecting power
• Disconnecting power during a transaction may
cause transaction data files that are not yet stored in
terminal memory to be lost. Never remove the
battery pack from the terminal if it is in the process of
Location — Electrical Considerations
• CAUTION: Due to risk of electrical shock or
terminal damage, do not use the terminal near
water, including a bathtub, wash bowl, kitchen
sink or laundry tub, in a wet basement, or near a
swimming pool. Also, avoid using this product
during electrical storms. Avoid locations near
electrical appliances or other devices that cause
excessive voltage fluctuations or emit electrical
noise (for example, air conditioners, neon signs,
high freqeuncy or magnetic security devices, electric
motors).
• Do not plug the power pack into an outdoor outlet.
It is not waterproof or dustproof. Avoid operation in
very hot, dusty, moistly, acidly or oily environment.
• Do not expose the device to temperatures above
50°C, which can occur behind glass under direct
sunlight, or to temperatures below 0°C.
• Allow adequate ventilation around the adapter.
Avoid locations with restricted airflow.
• Connect the adapter to a proper source. The
voltage and grounding requirements are found on the
product case and/ or packaging.
• Do not use the adapter if the cord is damaged.
• Do not attempt to service the adapter. There are
no serviceable parts inside. Replace the unit if it is
damaged or exposed to excess moisture.
performing a payment or other transaction („Please
wait..."). If this message appears for a longer period
of time, please contact your network provider.
• Maintain a sufficient distance to other electrical
devices, such as
security labels (min. 50 cm) since this can lead to
malfunctions.
• Your terminal contains
components that can be permanently damaged if
exposed to excessive shock or vibration. To minimize
the risk of damage to your terminal avoid dropping
your terminal and operating it in high-shock and
high-vibration environments.
• Never immerse the device in water, throw it into open
fire, or expose it to a high level of moisture. Wipe off
the device using only a slightly moistened cloth. Do
not use cleaning agent.
• For damage arising from the use of unapproved
external products (e.g. unsuited charging adapters,
power supply units, storage batteries, cables, etc.),
no liability is assumed.
cancelling machines
sensitive electronic
for