Bergstrom OpenAir Benutzerhandbuch Seite 18

EN
OPENAIR
INITIAL UNIT CONFIGURATION
The unit will initially show its software version on the display when powered up for the first time.
After a few seconds, it will enter initial configuration mode in order to select maximum unit power
between 1.2 (1230 W) or 2.0 (2020 W) from the control panel. Select the required option with the
up or down buttons on the panel or remote control and confirm by pressing the ON/OFF button on
the unit.
After confirming the power, the user can select battery type and the unit it is connected to,
selecting between lead acid (Pb) or lithium (Li) battery. Select the required option using the up
or down buttons on the control panel or remote control and confirm with the ON/OFF button on
the unit.
The user must select the measurement scale, either degrees Celsius (ºC) or degrees Fahrenheit (ºF),
in order to complete the configuration. Select the required option using the up or down buttons on
the control panel or remote control and confirm with the ON/OFF button on the unit. After this last
confirmation, the unit will go off and remain ready to power up.
18
TU ESPACIO DE VIDA CONFORTABLE
USER´S HANDBOOK MANUAL DE USUARIO MANUAL DE USUARIO
Caution: Before starting up the unit for the first time, ensure that the main power connection
cable and the battery charge test cable are connected properly.
Warning: The unit's maximum power must be selected based on the vehicle's size and
thermal requirements, as well as the type of batteries installed in the vehicle, in order to
ensure the unit's operating autonomy.