Inhaltsverzeichnis
Werbung
EC575000
ASSEMBLY AND INSTALLATION
Bearing (relay arm-rear shock absorber)
1. Install:
Bearing 1
NOTE:
Apply the lithium soap base grease on the
bearing when installing.
Install the bearing parallel until the stopper
5PA51710
ring groove appears by pressing its outer
race.
2. Install:
Stopper ring 1
NOTE:
After installing the stopper ring, push back the
bearing until it contacts the stopper ring.
5PA51720
Bearing, bushing and oil seal
1. Install:
Bearing 1
Bushing (swingarm) 2
Oil seal 3
To swingarm.
NOTE:
Apply the molybdenum disulfide grease on
the bearing and bushing when installing.
5PA51730
Install the bearing by pressing it on the side
having the manufacture's marks or numbers.
First install the bushing and then the bearing
to a specified depth from inside.
5PA51740
5 - 55
CHAS
SWINGARM
Installed depth of bearings and
bushings:
Bearing a: 4.5 mm (0.18 in)
Bushing b:4.5 mm (0.18 in)
Werbung
Inhaltsverzeichnis
