Assembly And Installation - Yamaha YZ85P1 Handbuch

CLUTCH AND PRIMARY DRIVEN GEAR
5PA40830
5PA40840
5PA40850
5PA40860

ASSEMBLY AND INSTALLATION

Push lever shaft
1. Install:
Push lever shaft 1
NOTE:
Apply the lithium soap base grease on the oil
seal lip and push lever shaft end.
Apply the transmission oil on the push lever
shaft.
Clutch
1. Install:
Washer [thickness 2 mm (0.08 in)] 1
Spacer 2
Primary driven gear 3
NOTE:
Apply the transmission oil on the washer,
spacer and primary driven gear inner circum-
ference.
2. Install:
Washer [thickness 4 mm (0.16 in)] 1
Clutch boss 2
3. Install:
Conical washer 1
NOTE:
Install the conical washer to the main axle 2
as shown in the illustration.
4 - 30
ENG