POCO line 5961008/00 Benutzerhandbuch Seite 80

Probleme
The air conditioning is
not placed on a flat
Big Noise
surface.
Overheat protection
Compressor
starts.
does not
work.
The distance between
the machine and the
remote control is too far.
The remote
control does
The remote control is not
not work.
aligned with the direction
of the remote control
receiver.
Batteries are dead.
The room temperature
Displays 'E1'.
sensor is abnormal.
The pipe temperature
Displays 'E2'.
sensor is abnormal.
Note: If problems not listed in the table occur or
recommended solutions do not work, please
contact the professional service organization.
Gründe
-76-
Lösungen
Put the air conditioning
on a flat and hard place
(to reduce noise).
Wait for 3 minutes until
the temperature is
lowered, and then
restart the machine.
Let the remote control
get close to the air
conditioning, and make
sure that the remote
control directly faces to
the direction of the
remote control receiver.
Replace batteries.
Check the room
temperature sensor and
related circuitry.
Check the pipe
temperature sensor and
related circuitry.