Troubleshooting - POCO line 5961008/00 Benutzerhandbuch

X. Troubleshooting
Do not repair or disassemble the air conditioning
by yourself. Unqualified repair will lead to failure of
the warranty card, and may cause damage to
users or their properties.
Probleme
There is no electricity.
The overflow indicator
displays "FL".
The ambient
temperature is too low or
The air
too high
conditioning
does not
In cooling mode, the room
work.
temperature is lower than
the set temperature; in
heating mode, the room
temperature is higher
than the set temperature.
In dehumidification
mode, the ambient
temperature is low.
There is direct sunlight.
Doors or windows are
open; there are a lot of
people; or in cooling
mode, there are other
The cooling
sources of heat.
effect is not
good
The filter screen is dirty.
The air inlet or outlet is
blocked.
Reasons
-75-
Solutions
Turn it on after
connecting it to a socket
with electricity.
Discharge the water
inside.
Recommend to use the
machine in at the
temperature of 7-35 °C
(44-95 °F).
Change the set
temperature.
The machine is placed in
a room with an ambient
temperature of greater
than 17 ℃ (62 °F).
Pull the Curtain.
Close doors and
windows, and add new
air conditioning.
Clean or replace the
filter screen.
Clear obstructions.