Altrad Belle MINIMIX 150E+ Bedienungshandbuch Seite 39

GENERAL
This machine is designed to give many years of trouble free operation. It is, however, important that the simple regular maintenance
A poorly maintained machine could be a danger to the operator and the other personnel on the worksite. ENSURE that the regular
ALWAYS use genuine Altrad Belle replacement parts, the use of spurious parts may void your warranty.
ENSURE
WARNING
DRUM
This is instantly removable by unscrewing anti-clockwise. When replacing make sure that it is fully screwed home to the shoulder or
the shaft will break. Take care when screwing on the drum, spinning on fast may damage the gearbox.
FRAME
The hole on the underside of the frame is to drain away any water.
BELT
WARNING
GEARBOX
The factory has preset the gearbox oil level. Before inspecting
the gearbox oil level, make sure the gearbox is cold before
Top up the gearbox in the mixing position to the level of the
CLEANING
Keeping the machine clean is an integral part of the service and maintenance program. The build-up of mud, dirt and debris could
situations.
WARNING
•
• DO NOT
• NEVER let any liquids near the engine/motor. Use 1" gravel and clean water to clean the inside of the drum. DO NOT use bricks
etc. as this will damage the drum.
After the cleaning process check that all connections and fasteners are in place and secure. Replace any if necessary.
Also ENSURE that all safety / warning decals are present in their correct locations. Replace any if necessary.
Service and Maintenance
On completion of maintenance, check that the mixer functions correctly and that all guards are correctly
DO NOT try to adjust with the power unit running.
NEVER use a hose or pressure washer to spray water on the machine while cleaning it. Water entering
the power unit components may cause a malfunction and/or injury.
ALWAYS wipe the battery pack clean with a dry, clean cloth. Before cleaning the battery pack,
ALWAYS set the machine on stable, level ground.
Gearbox Oil Filling Position
39
DO NOT try to adjust the belt. To
Oil Fill Plug
GB