Herunterladen Diese Seite drucken

Altrad Belle MINIMIX 150E+ Bedienungshandbuch Seite 37

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 148
LOADING AND UNLOADING
Never remain under or in the immediate vicinity of the machine when it is lifted by a crane. Only use
CAUTION
marked lifting points. Always make sure that all lifting devices are dimensioned for the weight of the
products.
CAUTION
OPERATING THE MIXER
Having carried out the Pre-Start Checks listed in the Safety Instructions section of this manual, you may start the power unit.
MIX RATIOS
applications require more aggregate. The ratios given below are guidelines: best proportions may depend on the quality of sand/stone
used.
before adding cement, to avoid sticking. Work consistently to the ratio of ingredients for whatever type of concrete mix you are
working to.
GETTING A GOOD MIX
mixing can reduce strength and cause segregation of the coarser aggregates.
Also do not get the concrete mix too wet as this can reduce strength and make it less able to withstand weathering.
LOOKING AFTER YOUR MIXER
dislodged by stopping the mixer.
Keep your mixer clean - material left in the drum will harden, and attract more on each use until the mixer is useless.
as this will do the job in half the time.
Applictions
Most Ordinary
Foundations
Rough Mass Concrete
Watertight Floors, Tanks, Pits etc....
Operating Instructions
ALWAYS remove the battery pack and isolator key from the power unit before transporting the machine.
Quantities
Cement
1
1
1
1
37
Sand
2
3
4
13
GB
Stone
4
6
8
3

Werbung

loading