Werbung
Verfügbare Sprachen
Verfügbare Sprachen
BATTERY PACK
•
ALWAYS use a genuine battery pack that is intended for this machine.
•
DO NOT disassemble the battery pack.
•
DO NOT touch the Battery Pack's connectors with metal objects or insert metal objects through openings into the Battery Pack.
•
ALWAYS keep the battery pack clean and dry.
•
NEVER allow the battery pack to come into contact with water.
•
The Battery Pack contains combustible organic solvents as an electrolyte solution. If the liquid gets into your eyes, rinse them with
plenty of water. After that, IMMEDIATELY seek medical care.
•
DO NOT allow children to use the Battery Pack. Store the Battery Pack out of the reach of children.
•
DO NOT store the Battery Pack in a damp location. Doing so can cause a malfunction.
•
When the Battery Pack is not in use, keep it away from other metal objects, like paper clips, coins, keys, nails, screws or other small
metal objects, that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or
STOP using the machine immediately and extinguish with dry chemical, sandy soil, carbon dioxide or appropriate
foam.
•
The Battery Pack will deteriorate if it is repeatedly charged and discharged, as well as if it is stored and not used.
•
As the Battery Pack deteriorates, its full-charge capacity decreases and the length of time it can be used shortens. Once the full-
charge capacity is reduced by deterioration, it cannot be recovered and cannot reach the charging capacity of a new Battery Pack.
•
ALWAYS remove the battery pack from the power unit when transporting or maintaining it.
•
ONLY charge the battery pack in a recommended charging unit.
•
DO NOT expose the battery pack to extreme temperatures (
•
NEVER attempt to service a damaged battery pack.
•
WORK ON THE BATTERY PACK OR POWER UNIT MUST ONLY BE CARRIED OUT BY SUITABLY COMPETENT &
QUALIFIED PERSONNEL
WEATHER CONDITIONS
•
We recommended that this machine not be used in heavy rain.
•
Rain can alter the condition of the worksite surface area. ALWAYS be aware of the condition of the surface after it has rained.
•
Operating the machine in poor visibility can result in serious injury or even death. ALWAYS use lighting to improve the visibitlity
of the area.
•
NEVER
DURING MAINTENANCE
•
ALWAYS remove the battery before carrying out any maintenance on the machine.
•
Carry out maintenance and repair work only if the machine is positioned on stable and level ground and has been secured against
inadvertent movement.
•
NEVER service the machine while the power unit is running, always switch OFF and remove the battery.
•
Clean the machine before carrying out maintenance/repair.
•
When dismantling assemblies containing components under pressure from springs, always wear suitable PPE. This will protect
•
When handling oil, grease and other chemical substances, observe the product related safety regulations.
AFTER MAINTENANCE
•
ALWAYS tighten any screwed connections that have been loosened during maintenance and repair.
of the maintenance and repair work.
•
ENSURE that all consumables and replaced parts are disposed of safely and with minimum environmental impact.
MODIFICATIONS & REPLACEMENT PARTS
•
NEVER
•
ALWAYS
safety of the machine. This may also void the Warranty.
Genuine Altrad Belle replacement parts can be purchased online at www.Altrad-Belle247.com
Safety Instructions
IMMEDIATELY
29
GB
Werbung
