Handling And Storage - Nicotra Gebhardt Rzr Betriebsanleitung

Warning
Fig. 5-4: Lifting lugs
Fig. 5-5: Lifting beam
EN-14/32

6. Handling and Storage

6.1. Packing
Centrifugal fans are packaged in sturdy cardboard boxes or on wooden
crates depending on their size and weight. Instructions on removing
transportation locks are enclosed.
6.2. Symbols on Packing
The following symbols are printed on the cardboard boxes:
Table 7-1:
Symbol
6.3. Handling of Centrifugal Fans
Danger of injury from falling components!
 Do use only certified lifting devices suitable for the fans to handle!
 Select the transportation mode according to the weight and execution of
the fan!
 Handle the fan as long time as possible with its original packing!
 Secure load!
 Do not stand under suspended loads!
1. Select the transportation mode according to the weight, execution, or
suspension possibilities of the fan
(Weight data see technical catalogue).
2. Centrifugal fans to be attached at the lifting lugs provided or at the base
frame, base plate, or supporting plate.
3. If necessary and possible screw in a shackle.
4. Fans without a frame to be handled by using special lifting device taking
the fan at both shaft ends and to be transported in a horizontal shaft
position only!
5. When using transport belts always provide 4 points of suspension (2
belts).
The belt may not exert a deforming force to the fan or its packing. If
necessary use a spacer!
6. Secure load with belts or fix it against sliding!
7. Handle centrifugal fan with care to prevent damages, avoid e.g. shock or
rough placement.
Symbols on packaging
Meaning
Handle with care
Keep dry
Top
English