Einhell bavaria 45.106.83 Bedienungsanleitung Seite 7

Anleitung BAS 3_6 LI Set_SPK1:_
to observe this point, the gearing may become
damaged.
Lighting (1):
The lamp (1) enables the work area to be illuminated
in unfavorable lighting conditions. You can switch on
the lamp with the switch (5).
Screwdriving
We recommend using self-centering screws (e.g.
Torx screws, recessed head screws) designed for
reliable working. Be sure to use a bit that matches
the screw in shape and size.
6. Technical data
Voltage supply
Speed
Forward and reverse rotation
Battery charging voltage
Battery charging current
Mains voltage for charger 230 V ~ 50 Hz
Sound pressure level L
pA
Sound power level L
WA
Weight
Vibration a
hv
7. Cleaning, maintenance and ordering
of spare parts
Always pull out the mains power plug before starting
any cleaning work.
Cleaning
Keep all safety devices, air vents and the motor
housing free of dirt and dust as far as possible.
Wipe the equipment with a clean cloth or blow it
with compressed air at low pressure.
We recommend that you clean the device
immediately each time you have finished using it.
Clean the equipment regularly with a moist cloth
and some soft soap. Do not use cleaning agents
or solvents; these could attack the plastic parts of
the equipment. Ensure that no water can seep
into the device.
23.05.2007 15:50 Uhr
Maintenance
There are no parts inside the equipment which
require additional maintenance.
Ordering replacement parts
Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
8. Disposal and recycling
The unit is supplied in packaging to prevent its being
3,6 V d.c.
damaged in transit. This packaging is raw material
200 rpm
and can therefore be reused or can be returned to
yes
the raw material system.
6 V d.c.
The unit and its accessories are made of various
300 mA types of material, such as metal and plastic.
Defective components must be disposed of as
special waste. Ask your dealer or your local council.
58,5 dB
69,5 dB
0,4 kg
< 2,5 m/s 2
Seite 7
GB
7