Herunterladen Inhalt Inhalt Diese Seite drucken

Create Warm Clear IR Bedienungsanleitung Seite 7

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 66
• The heater should not be located immediately below an electrical outlet.
• Do not use the heater outdoors.
• Do not use the appliance for other than its intended use. This appliance
is designed for household use only.
• Do not pull on the cord to disconnect it from the outlet. Instead, grasp the
plug and pull to disconnect.
• Do not attempt to repair, disassemble or modify the appliance. Contact
the after-sales service of the brand.
• Do not insert foreign objects into ventilation or exhaust openings, as this
may cause overheating, electric shock, fire, or damage to the appliance.
• When the heater is first turned on, it may release a slight odor. This odor
is caused by the initial heating of the internal heating elements and
should not recur.
• If you do not use the product for a long time, pull out the power plug, put
the product in the box and store it in a dry and ventilated place.
• When using the product, please do not place the air outlet and inlet next to
the wall or curtain to avoid obstructing the air and causing overheating.
• Do not use the product in direct sunlight.
• Do not place flammable or explosive items around the heater. The use of
the product in environments full of flammable air or dust is not allowed.
• Do not place the power cord near the front face of the appliance to avoid
high temperature damage to the cord.
• Under no circumstances place wet clothing on top of the heater.
• The voltage and frequency of the electrical supply must comply with the
technical specifications of the heater.
• It is not allowed to move or shake the appliance when it is in operation.
• Please keep the air inlet and outlet unblocked to avoid any malfunction,
such as distortion, color change, etc.
• Do not leave the power cord in the air outlet, it will damage the insulation
layer of the wires.
• Make sure that no water or rain enters the unit to avoid electric shock,
short circuit or fire.
• Clean the surface of the unit with a damp cloth. Do not use corrosive de-
tergents or solvents to clean. It is not allowed to wash directly with water.
• Do not handle the power cord or plug with wet hands.
• Do not insert wooden or metal sticks or other thin objects into the air
inlet or outlet.
• Do not place heavy objects on the power cord.
E NGLI SH
7

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis